The Trombone Glissando
The single most common “mistake” I see from composers in trombone parts is the unplayable glissando. Perhaps the most famous is from the fourth movement of Bartók’s Concerto for Orchestra:
Can’t do it (for reasons I’ll explain in a bit) but ugly little things like this keep turning up in my parts, maybe because one popular orchestration book calls it “perfect.” (Cough, Adler, cough.)
To his credit, Bartók probably knew what he was doing when he mocked Shostakovich. More than likely he was writing for someone playing a bass trombone pitched in F which would make this lick most playable. But 99.9999% of trombones today are pitched in B flat bringing us to the question of “what makes a trombone glissando possible?”
tl;dr: scroll down to the “Exhaustive List” below.
The Harmonic Series (You Should Know This)
To understand a trombone’s glissando, you first need to know the harmonic series and trombone layout. If you don’t know anything about the harmonic series take a second to digest that info (particularly the section “Frequencies, Wavelengths…”) I’ll wait here.
K, welcome back. Octave, fifth, fourth, major third, minor third, flat minor third, etc. You’re a better person now.
The Trombone (It’s An Extendable Tube)
Now let’s talk trombones. You’ll generally be dealing with one of two types: tenor trombones and bass trombones. There are plenty others: alto trombones, soprano trombones, contrabass trombones, piccolo trombones. They all work in the same basic way. Know what key they are pitched in and you are well on your way to figuring out how they tick.
Range is a Consideration
As I mentioned, the vast majority of tenor and bass trombones are in B flat. This means if you blow through the instrument with the slide all the way in you will get a note from the B flat harmonic series. Most professional tenor trombonists can reliably produce notes from the fundamental (B flat below the bass clef) to the twelfth harmonic (F at the top of the treble clef). Professional bass trombonists should be able to play at least up to the D below that F:
You can extend the slide (longer tube = lower sound) for six half steps giving you each down to the E harmonic series starting on the E two octaves below the bass clef:
For a bass trombonist the low E should be no problem. Depending on your tenor trombonist, that low E might be doable/might not. For tenors you should be safe down to the A flat:
Lower than that, ask your player. The more astute reader may notice that there are some notes missing, a fat diminished fourth from B natural below the bass clef to the E flat just above it. Trombonists have devised systems for playing these notes that open up opportunities for even more glissandi.
Valve Systems: More Options…
Additionally, to make the trombone fully chromatic (or close to it) from its lowest to highest register, trombonists usually have a valve and extra tubing on their instrument. When the player presses a trigger and opens the valve the tube lengthens making the pitch lower. Professional tenor trombonists usually have a valve that will lower the pitch of the instrument by a fourth pitching them in F (giving them the F harmonic series when the slide is all the way in):
Remember, that low F may not be playable by your tenor trombonist.
More Confusion…
However, here’s where things can get confusing. As you move the slide out with the valve depressed each subsequent half step is slightly further apart. In the end, the F valve (also called an “attachment”) can only lower you a fourth to the C harmonic series:
You guessed it, that lowest C will probably not be playable by your tenor trombonist. Now tenor trombonists are only missing one note: the B below the bass clef. For special occasions they can pull the tuning slide out on the valve section and lower the pitch of the valve to E giving them the E harmonic series down chromatically to the B harmonic series. You need to decide whether your occasion is special enough to ask a trombonist to do this.
Bass trombonists generally have two valves available to them and here’s where things get really wild. There’s no real standard for what keys their valves are pitched in. Generally, they all have an F valve and some other valve that will give them that low B. One common system is one valve in F, the other in D (or the combination of the first and second will give D).
Slide Chart
See below for a slide position chart by Dr. Jurgen Faisst that shows approximate positions and harmonics for the B flat trombone, the trombone with the F valve depressed and the trombone with a D valve engaged (notice that with the D valve the trombonist can only get a major third):
Possible Glissandi (The Exhaustive List)
Based on the info above we can construct layer upon layer of glissandi.
B flat trombone glissandi:
With the open B flat trombone these glisses can be as wide as a tritone. The first conceivable gliss would be from pedal E to pedal B flat but because of its extreme low register it’s not playable by all tenor trombonists:
The remainder of these glisses should be fine:
F valve:
With the F valve depressed you get these glissandi (maximum of a perfect fourth):
The next two glisses overlap with those possible on the open B flat horn. The next unique glissando would be:
Any glissando higher than these can be produced without the F valve.
D valve:
With the D valve engaged you get:
And…
Any glissando higher than that is playable either with the F attachment or on the open B flat trombone. You can use any of those in full or in part and have a playable glissando on the trombone.
Extending the Glissando
This is why the glissando from the bass trombone part to Bartók’s Concerto for Orchestra is not possible on most modern trombones. (Most, but not all. There are some valve combinations that can handle it.) To get from that B to that F you have to cross between two harmonics. When you cross harmonics you get a “bump,” an audible break in the sound (think switching from normal voice to falsetto). Much like a vocalist can work to minimize the noticeability of his break, a trombonist can do the same. With the ability to hide that change and some quick slide motion larger glissandi can be achieved. Take for instance:
Or, better yet, if you’re working with more than one trombone you can begin another player on the pitch on which the first player ends:
Glissando Examples
In use the glissando can sound anywhere along the range of hokey to eerie. The hokiest probably being Lassus Trombone, the bane of every trombonist’s existence:
And the eeriest may be from the last movement of Ligeti’s Chamber Concerto. The trombone rises from the unbearably long oboe tone. (Side note: this movement covers basically the entire range of the trombone from pedal F to F at the top of the treble clef.)
Michael Daugherty uses the trombone glissando beautifully in the last movement of his Motorcity Triptych. First in a bluesy bass trombone solo then in a ethereal plunger mute passage with the trombone section.
Michaela Eremiasova uses the gliss to create an undulating texture and to add tension.
747 by Jim Pugh and David Taylor begins with parallel glissandi between a tenor and bass trombone.
The fourth impromptu from Jan Koetsier’s Five Impromptus (for trombone quartet) contains a glissando passed between the members of the ensemble to create a continuous gliss. (The continuous gliss starts around 0:33.)
Harmonic Glissando
A similar technique is the harmonic glissando. This is where the player quickly moves through the harmonic series. I’ll cover this in a future post.
Ask A Trombonist
Finally, when you’re done writing your part send it to a trombonist and have them check it out. They should be able to tell you relatively quickly if what you’ve done works. Look, here’s the email address of a trombonist right here: michaelclayville (at) gmail (dot) com.